In the processing and production of aluminum-plastic panel manufacturers, the environmental requirements of performance testing must be clearly understood, so as to ensure the quality of aluminum-plastic panels, which is the production and processing information of aluminum-plastic panels that we should focus on.
The so-called aluminum-plastic panel manufacturer product standards refer to the standards for the flexural strength, corrosion resistance and color difference of the product, and only through experiments can the use of aluminum-plastic panels be guaranteed. When testing the performance of aluminum-plastic panels, the selected specimen should be placed in a standard environment for 24 hours, and the test should also be carried out under this condition unless otherwise specified. When preparing the specimen, it should be considered that the performance of the decorative surface of the product is required to be consistent in the vertical and horizontal directions, and in addition to the performance of the decorative surface, other requirements of the product in the vertical and horizontal directions and on the front and back sides are also consistent.
The production position of the product specimen of the aluminum-plastic panel manufacturer should be within 50mm of the edge of the product, and the size and quantity of the specimen shall be agreed upon by the supply and demand parties; When there is a dispute over the visual test results of the color difference of the product, the color difference arbitration test shall be carried out in accordance with the relevant regulations, and the consistency of the production direction of the specimen should be maintained in the test to ensure that the performance test results of the aluminum-plastic panel are excellent.